- As a basic pressure gauge manufactured based on JIS B 7505
- Bourdon tube pressure gauge standard, you can use this widely.
- Areliable pressure gauge with abundant production results
- "Inserting an O ring or a rubber packing in the joint part, it maintains stable sealing properties" and protects the internal structure.
- It can be used under rain, dew environment. (IP54 equivalent)
- The internal structure adopted the proven ST shape and took over the reliability.
- All main parts are made of stainless steel (except for some parts like a scale, which are not functionally necessary), it is robust and excellent in corrosion resistance.
- An all-round pressure gauge that can be used anywhere. (IP54 equivalent)
- Electrolytic polishing is applied, it is suitable for medical and food use.
- We adopted ABS resin for the case and made it cost-effective.
- Ideal for rust-prone places such as in the water use sections that do not require so tight sealability than where a closed type is needed.
-To protect the internal mechanism and ensure excellent durability and vibration resistance, glycerin is encapsulated inside the pressure gauge.
-Ideal for places of violent vibration and pulsation, which were considered impossible with a pressure gauge.
- The adapted micro switch is a proven standard from and it imporoved the reliability.
- When set pressure is reached, it activates switch to use for alarm or control.
- When set pressure is reached, it activates switch to use for alarm or control.
- "Compact pressure gauge perfect for incorporation into a machine or equipment."
- The maximum pressure range is ultra-wide, with 0.1 to 40 Mpa (size 40, 50) and it covers from " pneumatic equipment to high pressure hydraulic equipment."
- We can respond flexibly to custom made requests such as name insertion and special additional processing.
- Space saving by displaying two sites' pressures in one pressure gauge.
- It is perfect in comparing two pressures.
- Indicate pressure difference between 2 points
- Measurement of flow rate, measurement of clogging of filter, measurement of internal and external pressure difference in clean room
- A pressure gauge that does not use gears for the enlarging mechanism and improves durability.
- The link formula instructs the displacement of the Bourdon tube to the pointer using the link.
- A pressure gauge that does not use gears for the enlarging mechanism and improves durability
- The spiral type winds the Bourdon tube a number of times to set the pointer and directs the pressure.
- Spiral type has marvelous durability because of no sliding part, therefore ultra miniaturization can be realized.
- It is used for pulsating pressure measurement of a Plunger type pump and a portable cylinder for aircraft.
- It is used for low pressure measurement which can not be taken with an ordinary pressure gauge of 60 kPa (6000 mmH2O) or less.
- It is used for low pressure measurement which can not be taken with an ordinary pressure gauge of 60 kPa (6000 mmH2O) or less.
- The case is drip-proofed (IP 22 equivalent).
・It is used for low pressure measurement which can not be taken with an ordinary pressure gauge of 60 kPa(6000 mmH2o) or less.
- It is used for gas pressure measurement of oxygen, acetylene, hydrogen, helium, etc.
- Gas leak test, adoption of safety blowhole and self-extinguishing resin and thorough safety measures.
- Completely dry treatment that does not emit any harmful water or oil to connected equipment such as pressure regulator.
- It is used for gas pressure measurement of oxygen, acetylene, hydrogen, helium, etc.
- Gas leak test, adoption of safety blowhole and self-extinguishing resin and thorough safety measures.
- Completely dry treatment that does not emit any harmful water or oil to connected equipment such as pressure regulator.
- For high-purity gases, airtightness and cleanliness are fully considered, making it ideal for semiconductor process.
- It is used for gas pressure measurement of oxygen, acetylene, hydrogen, helium, etc.
- Gas leak test, adoption of safety blowhole and self-extinguishing resin and thorough safety measures.
- Completely dry treatment that does not emit any harmful water or oil to connected equipment such as pressure regulator.
- For high-pressure hydrogen gas which has a material considering hydrogen embrittlement, a bulkhead is provided to allow the gas to escape backward in the rupture of the Bourdon tube in the unlikely event.
- Provided a diaphragm so that fluid does not enter directly into the pressure gauge.
- For the measurement of corrosive fluid, high viscosity fluid in chemical plants, food factories, etc.
- No oil treatment is done for all models.
- Provided a diaphragm so that fluid does not enter directly into the pressure gauge.
- For the measurement of corrosive fluid, high viscosity fluid in chemical plants, food factories, etc.
- Possible to separate the pressure receiving part and the indicating part as a separate type.
- No oil treatment is done for all models.
- Provided a diaphragm so that fluid does not enter directly into the pressure gauge.
- For the measurement of corrosive fluid, high viscosity fluid in chemical plants, food factories, etc.
- Possible to separate the pressure receiving part and the indicating part as a separate type.
- No oil treatment is done for all models.
Pressure gauge, thermo sensors, thermometer,
and other related products.
Tel. +81-266-54-3312