homeProductsPressureGauge>Sealed type PG

Sealed type PGWPtypepdf Opened by the PDF form

  1. A seal that puts O ring and RubberGgasket in connecting parts such as cases and the covers and is steady is kept, and an internal structure is protected.
  2. It is possible to use it under the environment of rain and dew.
  3. An internal structure adopted STtype with results and succeeded reliability.

Example of order※When the mouse is put, the explanation is displayed.

WP A M _ G3/8 × 100 × 2.5 S1・ E1・

Please quote the sign from the following table.

※Please confirm it suits "Condition of use" and "Adjusting pressure medium" to obtain the performance enough safely when you select the pressure gauge.

Type WP
Size 60 75 100 150
External shape A B D A B
Additional
specification
(each usage)
Common type(sign none) Common type for steam(sign M)  Heatproof type(sign H)
Vibration-proof type(sign V) Vibration-proof type for steam(sign MV)
Vibration heatproof-proof type(sign HV)
Accuracy class 1.6 <Standard>1.6 <Specification>1.0
(1)Connected screw G・1/4 G・3/8 G・3/8 G・1/2
(2)
Maximum
scale
value
(MPa)
Pressure
Gauge
0.06 0.1 0.16 0.25 0.4 0.6 1 1.6 2.5 4 6 10 16 25 40 60 100(Excluded size60)
Vacuum meter -0.1
Manifold type <Pressure part>0.1 0.16 0.25 0.4 0.6 1 1.6 2.5  <Vacuum part>-0.1
M
a
t
e
r
i
a
l
Liq
uid
Medium
varieties
<Standard> For general <Specification> For steam and heatproof <Specification> For anti-corrosion
Stock C3604 C3604 SUS316
Bourdon tube <Low pressure>C2700、C5191<High pressure>C5191、SUS316 SUS316 SUS316
Machine
on inside
<Standard> Copper base alloy <Specification> SUS
Case <Standard>SUS・Cloth <Specification>AI・Silver(150 is Standard)
Cover SUS・Cloth AI・Silver(150 is Standard)
Lamina lucida <Standard> Polycarbonate(60 is a tempered glass board) <Specification>Tempered glass board
Scale plate AI Display color・・・Pressure part:Black ・ Vacuum part:Red
Indicator AI <Specification>0 point adjustment needle(Size75、100、150)
Additiona
specification
(special)
Oil processing(SignE1) Clean processing(SignE2) Gasleak Test(SignE3)
(3)Throttle screw(SignF1) Installation hole processing(Dtype)(SignF2)
Installation metal fittings(Dtype)(SignF3)
Case with safety window(SignF4) (4)Installation needle:Label type(SignF5)
(5)Scale color paint(SignF8) (6)Document attachment(SignT1)

□Remarks

  1. Please inquire when assuming it to other screw necessities.
  2. Please inquire when you need other maximum scale values.
  3. As for squeezing Throttle screw, the difference is in the buffering effect because of the viscosity and the flow velocity etc. of the fluid though the diameter is StandardФ0.5. Please see other throttles and see "Throttle screw" for the necessity.
  4. Label typeInstallation needle is appended by Red and each of two greens. Please paste to Lamina lucida on the pressure scale mark to be assumed to be a sign and use it.
  5. Please specify the range of the color paint scale and the color for Scale color paint.
  6. Please direct the inspection report, the mill sheet, the standard machine inspection result book, the inspection points book, and the traceability system chart, etc.
Copyright (C) 2009 Takashimakeiki. All Rights Reserved.