homeProductsPressureGauge>Standardized form PG

Standardized form PGSTtypepdf Opened by the PDF form

  1. It is possible to use it widely as a basic pressure gauge produced based on the JIS B 7505 burudon tube pressure gauge standard.
  2. Pressure gauge with high abundant reliabilities of production results.

Example of order※When the mouse is put, the explanation is displayed.

ST A M _ G3/8 × 100 × 2.5 S1・ E1・

Please quote the sign from the following table.

※Please confirm it suits "Condition of use" and "Adjusting pressure medium" to obtain the performance enough safely when you select the pressure gauge.

Type ST
Size 60 75 100 150
External shape A B D A B D A B D A B D
Additional
specification
(each usage)
Common type(sign none) Common type for steam(sign M)
Heatproof type(sign H) Vibration-proof type(sign V)
Vibration-proof type for steam(sign MV) Vibration heatproof-proof type(sign HV)
Accuracy class 1.6 <Standard>1.6 <Specification>1.0
(1)Connected screw G・R1/4 G・R3/8 G・R3/8 G・R1/2
(1)
Maximum
scale
value
(MPa)
Pressure
Gauge
0.06 0.1 0.16 0.25 0.4 0.6 1 1.6 2.5 4 6 10 16 25 40 60 100(Excluded size60)
Vacuum meter -0.1
Manifold type <Pressure part>0.1 0.16 0.25 0.4 0.6 1 1.6 2.5  <Vacuum part>-0.1
M
a
t
e
r
i
a
l
Liq
uid
Medium
varieties
<Standard> For general
<Specification> For steam and heatproof <Specification> For anti-corrosion
Stock C3604 C3604 SUS316
Bourdon tube <Low pressure>C2700、C5191<High pressure>C5191、SUS316 SUS316 SUS316
Machine
on inside
<Standard> Copper base alloy <Specification> SUS(Excluded size60)
Case SPC・Cr plating SPC・Black painting
<Dtype>Cr plating
SPC・Cr plating
Cover SPC・Cr plating <Dtype>
SUS304・Cloth
SPC・Black painting
<Dtype>SUS304・Cloth
SPC・Cr plating
Lamina lucida <Standard> Inorganic glass board(signP5) <Specification>Polycarbonate board(sign P7)
Scale plate AI  Display color・・・Pressure part・Black ・ Vacuum part:Red
Indicator AI  <Specification> 0 point adjustment type needle(Size75,100,150)
Additiona
specification
(special)
Oil processing(SignE1) Clean processing(SignE2) Gasleak Test(SignE3)
(3)Throttle screw(SignF1) Installation hole processing(D、D3type)(SignF2)
Installation metal fittings(D、D3type)(SignF3) Case with safety window(SignF4)
(4)Installation needle:Label type(SignF5)、Ring type(A、Btype60、75、100(SignF6)
Switch type(SignF7) (5)Scale color paint(SignF8) (6)Document attachment(SignT1)

□Remarks

  1. Please inquire when assuming it to other screw necessity.
  2. Please inquire when you need other maximum scale values.
  3. As for squeezing Throttle screw, the difference is in the buffering effect because of the viscosity and the flow velocity etc. of the fluid though the diameter is StandardФ0.5. Please see other throttles and see "Throttle screw" for the necessity.
  4. Please see "Installation needle" for details of Installation needle.
  5. Please direct the inspection report, the mill sheet, the standard machine inspection result book, the inspection points book, and the traceability system chart, etc.
Copyright (C) 2009 Takashimakeiki. All Rights Reserved.