homeProductsPressureGauge>Small pressure gauge

Small pressure gaugeKGtypepdf Opened by the PDF form

  1. Most suitable Small pressure gauge for building in equipment and device.
  2. The range of the maximum pressure power is 40MPa(Size40,50) from 0.1Mpa, and it is very wide. It corresponds from the empty pressure equipment to a high hydraulic equipment to all devices.
  3. It is possible to correspond to the customer's custom order flexibly. (for instance, filling in and special, additional processing etc. of name)

Example of order※When the mouse is put, the explanation is displayed.

KG D4 R1/8 × 40 × 2.5 P3・ E1・

Please quote the sign from the following table.

Small pressure gauge

※Please confirm it suits "Condition of use" and "Adjusting pressure medium" to obtain the performance enough safely when you select the pressure gauge.

Type KG
Size 30 40 50
External shape A D4 A D3 D4 A D3 D4
Additional
specification
(each usage)
Common type(sign none)
Accuracy class 4% FS 3% FS 2.5% FS
(1)Connected screw R1/8 R1/8 R1/4
(2)
Maximum
scale
value
(MPa)
Pressure
Gauge
0.4 0.6 1 1.6 2.5 0.1 0.16 0.25 0.4 0.6 1 1.6 2.5 4 6 10 16 25 40
Vacuum meter -0.1
Manifold type
M
a
t
e
r
i
a
l
Liq
uid
Medium
varieties
For general
Stock C3064
Bourdon tube <Low pressure>C2700、C5191 <High pressure>C5191、SUS316
Machine
on inside
<Standard>Copper base alloy
Case SUS・Stainless steel
Flesh-colored
<Standard>SPC・CrPlating Only D4
<Specification>SUS・Stainless steelFlesh-colored(sign P3)
Ring SUS・Stainless steel
Flesh-colored
<Standard>SPC・CrPlating
SUS・Stainless steelFlesh-colored Only D4
Lamina lucida Polycarbonate board
(sign P7)
<Standard>Polycarbonate(50=Inorganic glass board)
<Specification>Inorganic glass board
Scale plate AI Display color・・・Pressure
Gauge:Black ・ Vacuum meter:Red
Indicator AI
Additiona
specification
(special)
Oil processing(SignE1) Clean processing(SignE2) Gasleak Test(SignE3)
(3)Throttle screw(SignF1) Installation hole processing(D3type)(SignF2)
Installation metal fittings(D3type)(SignF3) Case with safety window(SignF4)
(4)Installation needle:Label type(SignF5) (5)Scale color paint(SignF8)

□Remarks

  1. Please inquire when you need other screws.
  2. Please inquire when you need other maximum scale values.
  3. As for squeezing Throttle screw, the difference is in the buffering effect because of the viscosity and the flow velocity etc. of the fluid though the diameter is StandardФ0.5. Please see other throttles and see "Throttle screw" for the necessity.
  4. Label typeInstallation needle is appended by Red and each of two greens. Please paste to Lamina lucida on the pressure scale mark to be assumed to be a sign and use it.
  5. Please specify the range of the color paint scale and the color for Scale color paint.
Copyright (C) 2009 Takashimakeiki. All Rights Reserved.