homeProducts>PressureGauge

Standardized form PressureGaugeSTtype
  1. The most general pressure gauge. It is possible to produce it with a low cost.
  2. It is possible to use it widely as basic PressureGauge produced based on the JIS B 7505BurudonTubePressureGauge standard.
  3. PressureGauge that abundant reliabilities of production results are high.

Details are seen.

Details are opened by the PDF form.

Sealed type PressureGaugeWPtype
  1. O ring and Gasket of rubber are put in connecting parts such as cases and the covers, a steady seal is kept, and Protection has an internal structure.
  2. It is possible to use it under the environment of rain and dew.
  3. An internal structure adopted STtype with results and succeeded reliability.

Details are seen.

Details are opened by the PDF form.

Stainless PressureGaugeWStype
  1. Main part is solid excellent in corrosion resistance as the stainless steel (Scale plate etc. . A part of unnecessary part is functionally excluded).
  2. All land PressureGauge where service space is not chosen as sealed structure.
  3. The electrolytic polishing is given, and it is the best for the medical treatment and goods of for food.

Details are seen.

Details are opened by the PDF form.

Plastic case PressureGaugePCtype
  1. It is the best for the place where rust in the water surroundings etc. for which Sealing uptype doesn't need the confidentiality is generated easily.
  2. ABSresin was adopted for the case and making to a low cost was measured.

Details are seen.

Details are opened by the PDF form.

Glycerin PressureGaugeGRtype
  1. The glycerin is enclosed in the pressure gauge, and an internal mechanism is protected, and it is preeminent endurance, and a vibration resistance. 。
  2. It is the best for the place of the thumping vibration and the pulse said to be impossible in the pressure gauge.

Details are seen.

Details are opened by the PDF form.

PressureGauge with point of contactMS・CStype
  1. When it reaches setting Pressure, the microswitch is used to operate and to warn and to control.
  2. The microswitch adopts Standardtype with results, and has improved reliability.

Details are seen.

Details are opened by the PDF form.

JPI standard PressureGaugeWJtype
  1. Produced PressureGauge ..the JPI standard (oil society standard)
  2. Each performance trial of the reading, the overpressure, the static pressure, the impact-proof, heatproof, the temperature, the vibration proof (product and internal mechanism), and Sealing up is clear. It is possible to correspond to all industries to say nothing of the oil industry.

Details are seen.

Details are opened by the PDF form.

Small PressureGaugeKGtype
  1. Most suitable Small pressure gauge for building in equipment and device.
  2. The range of the maximum pressure power is 40MPa(Size40,50) from 0.1Mpa, and it is very wide. It corresponds from the empty pressure equipment to a high hydraulic equipment to all devices.
  3. It is possible to correspond to the customer's custom order flexibly. (for instance, filling in and special, additional processing etc. of name)

Details are seen.

Details are opened by the PDF form.

Duplex type PressureGaugeDPtype
  1. Pressure in two places is directed to one PressureGauge, and it miniaturizes it.
  2. It exercises one's power over two pressure comparisons.

Details are seen.

Details are opened by the PDF form.

Differential Pressure instrumentDFtype
  1. The Pressure difference of two places is shown.
  2. Flow measurement, stopped up measurement of filter, and clean room inside and outside differential pressure measurement.

Details are seen.

Details are opened by the PDF form.

Gyaresu PressureGaugeRS・SPtype
  1. PressureGauge that doesn't use Gya for expansion mechanism, and improves durability.
  2. Indicator is told the displacement of the bourdon tube by using the link, and the link type is directed.
  3. It is used for pulse Pressure measurement of bran jar type pump and a portable gas cylinder for the aircraft, etc.

Details are seen.

Details are opened by the PDF form.

TasimeterMPtype
  1. It uses it for a low pressure measurement not to be able usually to measure 60kPa(6000mmH2O) or less with PressureGauge.

Details are seen.

Details are opened by the PDF form.

PressureGauge for gasOGtype
  1. It uses it for the gas pressure measurements such as oxygen, the acetylene, hydrogen, and helium.
  2. Gasleak Test, safety blow hall, and self-digestibility Resin adoptions and thorough security precautions.
  3. Complete, dry processing that doesn't turn on harmful water and oil to Connection equipment such as PressureAdjustment containers at all.

Details are seen.

Details are opened by the PDF form.

PressureGauge for high-purity gasHCtype
  1. It uses it for the gas pressure measurements such as oxygen, the acetylene, hydrogen, and helium.
  2. Gasleak Test, safety blow hall, and self-digestibility Resin adoptions and thorough security precautions.
  3. It considers enough in the confidentiality and the washing soil, and is the best for the semiconductor process.

Details are seen.

Details are opened by the PDF form.

Diaphragm type PressureGaugeSA・SB・SDtype
  1. The diaphragm is installed so that the measurement liquid should not enter in PressureGauge directly.
  2. For measurement of corrosive fluid and high viscosity fluids such as chemical works and food factories
  3. The pressure receiver and the instruction part can be separated as this
  4. All seeds Oil processing are executed.

Details are seen.

Details are opened by the PDF form.

0.6th class PressureGaugeMAtype
  1. Highly accurate pressure gauge used for examination and inspection, etc.

Details are seen.

Details are opened by the PDF form.

Standard type PressureGaugeFG・WGtype
  1. Standard type PressureGauge also has the authorization inspection result note for pressure Standard of the factory.
  2. Highly accurate pressure gauge used for examination and inspection, etc.

Details are seen.

Details are opened by the PDF form.

Special specification PressureGaugeOriginal
  1. Pressure gauge that uses burudon Tube, and uses it for special usage
  2. I will design and produce it in the original according to the demand of the customer.

Details are seen.

Details are opened by the PDF form.

Copyright (C) 2009 Takashimakeiki. All Rights Reserved.